Cleaning and
Disinfecting

your Avidhrt
Sense Device

Please follow these instructions to keep your Avidhrt Sense device clean and ensure your vital readings are not affected by artifacts such as dust and moisture.

Device Composition Copy@3x.png
device top@3x.png

Cleaning

Your Device
Group 9@3x.png
Group 7@3x.png
Group 4@3x.png
Group 2@3x.png

You will need your Avidhrt Sense device, Rubbing Alcohol pads(Standard Isopropyl), and Q-Tips.
 

Using the Isopropyl pad, wipe your device for at least 30 seconds.

Using a second pad, wipe the device's case for at least 30 seconds.

Wait for at least 5 minutes for the product to dry out.

If you observe any residual contaminant, repeat the process.

Disinfecting

Your Device

We recommend disinfecting the device using the following instructions every two weeks. If you are sharing the device with other family members, you should disinfect it every time before each reading for safety purposes.

011 (1)@3x.png
Group 9@3x.png

Follow the steps mentioned for cleaning: using Rubbing Alcohol pads(Standard Isopropyl) to wipe your device and case for at least 30 seconds each.

This includes the top, the bottom, and the sides of the device.

Group 8@3x.png

Additionally, soak a Q-Tip by dabbing onto an isopropyl pad.

Group 7@3x.png

With the soaked Q-Tip clean/wipe the groove between the applied parts and the device case, as shown in the image above.

Group 4@3x.png

Wait at least 5 minutes of drying after applying Isopropyl

Group 2@3x.png

Before completing your cleaning, inspect the applied parts and device case to ensure they are free of any residuals.

007 Trans@3x.png

For more information, visit the user manual.

Here are the instructions to clean your device and remove artifacts such as dust and moisture.